|
The purpose of this table is to direct the user faced with a drive problem towards the TEXROPE® belt type which is best suited to the application. New synchronous belt drives  | |
| ** | **** | **** | *** | ** | ** | | * | *** | **** | *** | -
|
| | 200 | 400 | 675 | 70 | | 50 (1) | | **** | **** | **** | **** | - | | | 60 m/s | 60 m/s | 60 m/s | 75 m/s | - | 60 m/s | | - | - | - | - | - | - | | ** | *** | **** | *** | - | - | | * | *** | **** | * | ** | ** | | - | - | - | - | - | - | | ** | ** | *** | ** | ** | *** | | ** | ** | *** | ** | *** | | | ** | ** | ** | * | ** | *** | | - | - | - | - | - | - | | - | - | - | - | **** (2) | |
| | Synchronisation required | | New drive | | Maximum power (kW) | | Reduced shaft loads | | Max. linear velocity (3) | | Small diam. possible | | Overall dimensions | | Considerable torque variations | | Friction clutch | | Reverse bending | | Linear displacement | | Serpentine drive | | Speed variation | | Required cleanliness | |
(1) Distributed on both sides
(2) Polyurethane belts leave no stains on paper or other material
(3) Depends on the pulleys, materials and balancing Key
The indications are relative, and can be interpreted as follows: | Not a feasible solution or one strongly advised against with this type | | * | Possible, but not really recommended | | ** | Good | | *** | Very good | | **** | Excellent | | Criterion not relevant to this type |
This table does not replace the technical manuals nor any advice given by your TEXROPE® distributor. New V-belt drives  | |
| - | - | - | - | - | - | - | | * | **** | *** | *** | (1) | -
| (2) | | 400 | 500 | 600 | 300 | 300 | 100 | 10(3) | | *** | *** | *** | *** | * | - | - | | 35 m/s | 40 m/s | 45 m/s | 50 m/s | 55 m/s | | 50 m/s | | ** | * | *** | **** | *** | - | *** | | ** | *** | **** | **** | * | - | - | | *** | *** | **** | **** | * | - | *** | | * | * | | | * | - | **** | | * | | * | ** | **** | - | **** | | - | - | - | - | - | - | - | | - | - | - | - | *** | - | - | | - | - | - | - | - | *** | - | | - | - | - | - | | - | - |
| | Synchronisation required | | New drive | | Maximum power (kW) | | Reduced shaft loads | | Max. linear velocity (4) | | Small diam. possible | | Overall dimensions | | Considerable torque variations | | Friction clutch | | Reverse bending | | Linear displacement | | Serpentine drive | | Speed variation | | Required cleanliness | |
(1) Special cases only
(2) Agricultural machinery
(3) Generally, single belt
(4) Depends on the pulleys, materials & balancing Key
The indications are relative, and can be interpreted as follows: | Not a feasible solution or one strongly advised against with this type | | * | Possible, but not really recommended | | ** | Good | | *** | Very good | | **** | Excellent | | Criterion not relevant to this type |
This table does not replace the technical manuals nor any advice given by your TEXROPE® distributor.
|